If you want a high end looper without menu diving for live use then I would 100% give this a look. Please feel free to ask any questions. 4 Play Styles - play loops in series or parallel. Easily syncs to an external MIDI clock source -The MIDI Start and Stop commands are supported as well.
Two Sample Rates - 48KHz or 24KHz, both use 20 bit samples; through signal is always 48KHz / 24 bits. Thru Mute Function - turns off through signal.
Decay Rate Knob - sets the rate at which earlier parts fade when new ones are added. Stereo or Mono - recording and playback will be stereo or mono depending on which of the Smart Jacks you use. Smart Jacks - the RangT III senses which jacks are being used and provides different signal routing options. Rugged 9" x 6" x 2 steel chassis.
Functions: Stacking - "stacking" is adding a part to a loop There is no limit to the number of parts you can stack. Undo/Redo - the last part stacked can be muted, then played again or rerecorded. Erase - loops can be erased one at a time or all at once; some loops can be erased while others plays.Copy Loop - a complete loop can be copied whether it is playing or not Copy Live - this enables "re-sampling" and is very powerful; the pedal's output is routed to a new loop Octave - plays loop an octave lower and at half speed Reverse - loop plays backwards. Once - loop plays one time through then stops or if already playing, it stops at its end. Stutter - enables repeatedly starting a loop over before it plays all the way through, sort of like record scratching.
Fade - loop(s) fades in or out with one button press; fade time can be 3 to 43 seconds. Reverse Solo - this is a built-in effect and enables you to create reverse leads live.